Child pages
  • Server OS and Third Party Software Setup - 6.*

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

...

How to setup the server including OS installation, third party software and components installations.

Contents

...

  • Install your choice of Linux distribution.
    Indiana University currently runs Variations on Red Hat Enterprise Linux 6 (RHEL 6). Derivatives of it such as Centos or White Box will be very similar, but for other distributions, the filenames and/or procedures may be different. The instructions below are tailored to RHEL6.
    • Select "Software Development Workstation" when asked about selecting a software set.
    • When creating the first user, this can be the "dmlserv" user that is required further on in the installation. ( #Variations Variations Administration User Account Creation )
    • Set up your RedHat Network subscription, and update to latest release:
      yum update
    • Install needed packages
      yum install gd-devel gdbm-devel Warninghostname -i returns the IP and 127.0.0.1 so scripts will have to be changed to split on spaces to get just the first IP address
    • Ensure that hostname -i returns the numeric IP address and not the host name.
      • If hostname -i returns the host nameIP and 127.0.0.1, edit /etc/hosts so that the ::1 entry has only the values localhost6.localdomain6 and localhost6.
      • If hostname -i returns the host name, edit /etc/hosts to put the IP and hostname in a separate line entry.
        Code Block
        titleExample /etc/hosts
        # Do not remove the following line, or various programs
        # that require network functionality will fail.
        127.0.0.1       localhost.localdomain localhost
        129.12.345.67   taishan.dlib.indiana.edu taishan
        ::1             localhost6.localdomain6 localhost6
        

...

  • Create Network Alias Devices
    • These IP addresses will be used for the Variations webserver and Darwin streaming server. They must be on the same network as the machine's address. The NETMASK and BROADCAST variables below will be the same as their counterparts in /etc/sysconfig/network-scripts/ifcfg-eth0.
    • Create an Network Device for the webserver by creating /etc/sysconfig/network-scripts/ifcfg-eth0:0 with this content:
      No Format
      DEVICE=eth0:0
      IPADDR=Variations webserver IP address
      NETMASK=Variations webserver netmask
      BROADCAST=Variations webserver broadcast address
      ONBOOT=yes
      
    • Create a Network Device for the streaming server by creating /etc/sysconfig/network-scripts/ifcfg-eth0:1 with this content:
      No Format
      DEVICE=eth0:1
      IPADDR=_Darwin streaming IP address
      NETMASK=Darwin streaming netmask
      BROADCAST=Darwin streaming broadcast address
      ONBOOT=yes
      
    • Bring up the new devices to verify they are configured correctly:
      ifup eth0:0
      ifup eth0:1
      You will need to do this only once, since they will be brought up when the machine is rebooted.

Firewall

...

...

Does Samba use 137-139 and 445 or just 139?

Variations uses the following ports:

  • eth0 - TCP 139 and 445 (Samba), 1099 (RMI Registry), 1100 (UI Logging Server), 49930 (Variations RMI Server), and 49931 (Variations RMI Server)
  • eth0:0 (Apache) - TCP 80, 443
  • eth0:1 (Darwin Streaming Server) - TCP 80, 554 and UDP 6970-6999

...

  • Download the latest JavaSE 1.6 SDK JDK -rpm.bin Package for your architecture from Sun.
    IU is currently running Java version 1.6.0_24.
  • Run:
    sh jdk-6u25-linux-i586x64-rpm.bin
    and accept the license agreement.
  • Create /etc/profile.d/java.sh with this content:
    No Format
    export JAVA_HOME=/usr/java/jdk1.6.0_25
    export PATH=$JAVA_HOME/bin:$PATH
    
    Note

    Check that your JAVA_HOME location and version matches your installation

  • Modify the file $JAVA_HOME/jre/lib/security/java.policy by adding the lines listed below to the grant block. Modify the IP addresses and machine names to those of the machine for your Variations server. These additions are necessary to get the Variations servers to work. For example:

    Example IP

    Server

    Example DNS Name

    129.79.184.181

    Variations Webserver (device eth0:0)

     

    129.79.184.188

    host machine (device eth0)

    Server1.dlib.indiana.edu

    No Format
    permission java.net.SocketPermission "129.79.184.181:80",     "connect,resolve";
    permission java.net.SocketPermission "Server1.dlib.indiana.edu", "resolve";
    permission java.net.SocketPermission "129.79.184.188:1024-",  "connect,accept,resolve";
    permission java.util.PropertyPermission "dml.client.url.userguidebase", "read";
    permission java.util.PropertyPermission "dml.leaseManager.*", "read";
    permission java.util.PropertyPermission "dml.login.loginHandler", "read";
    permission java.util.PropertyPermission "user.dir", "read";
    permission java.util.PropertyPermission "variations2.dir", "read";
    permission java.io.FilePermission "<<ALL FILES>>", "read,execute";
    permission java.io.FilePermission "/home/dmlserv/content/-", "read,execute,delete";
    permission java.io.FilePermission "/home/dmlserv/public_html/score-leases/-", "read,execute,delete";
    permission java.lang.RuntimePermission "setFactory";
    

...

  • MySql has internal parameters specifying how long to keep a stale connection before dropping it. For interactive logons this is interactive_timeout and for non-interactive it is wait_timeout. Note that wait_timeout is set from interactive_timeout when the login is interactive. The default setting for these parameters is 8 hours (specified in seconds). After this time, the connection is dropped and cannot be reestablished without restarting the server. To fix this problem set both wait_timeout and interactive_timeout to 24 hours (86,400 seconds) in the MySql configuration file /etc/my.cnf under both the mysqld and mysqld_safe sections.
    No Format
    wait_timeout=86400
    interactive_timeout=86400
    character_set_client=utf8
    character_set_server=utf8
    default-storage-engine=INNODB
    
    The default minimum length for words used in fulltext indexes is 4. This means that searches for words less than 4 characters will fail (e.g., "U2" or "Yes"). It is probably a good idea to reset this to 1 in the /etc/my.cnf file under both the mysqld and mysqld_safe sections. Also, MySQL has a default stopword file that excludes certain words from the text index, and it may exclude words that users might reasonably want to search on. Therefore, it may be best to turn this off by setting ft_stopword_file to "". For a list of MySQL default stop words, see http://dev.mysql.com/doc/refman/5.1/en/fulltext-stopwords.html. One can also set ft_stopword_file to the name of a file that contains a custom list of stop words.
    No Format
    ft_min_word_len=1
    ft_stopword_file=""
    
  • Set mysql to start automatically at boot:
    chkconfig mysqld on
  • Start the server now:
    service mysqld start
  • Download MySQL Connector/J database driver for Java (version 5.1 or later).
    • Expand the archive and put the file mysql-connector-java-5.1.1217-bin.jar in the location _/usr/local/lib/_you can put this file in another location but will need to update the configuration file later.

...

  • Install Perl
    • Check to see if perl is already installed:
      yum list perl
    • If needed, install perl:
      yum install perl
  • Install other needed modules and packages
    Note

    Note that cpan is an online repository for perl modules and that installing modules from it may occasionally fail due to failed tests. In these situations, you can pass a flag to the cpan command that forces the installation. Your command should then look like cpan -fi module. Note when you do this so that you can be on the lookout for any issues that may arise as a result of these potentially buggy perl modules. You can update the perl modules when a new version is released by running the install command again. Many modules will require dependency modules so make sure to answer yes to the prompts to include them in the build/install process.

  • Configure and update CPAN:
    cpan -i Bundle::CPAN Answer 'noyes' to manual the automatic configuration question.If necessary, configure CPAN: Run cpan, then execute o conf init connect_to_internet_ok urllist
  • Answer yes to connecting to default sites and then setup mirrors
  • Excute o conf commit then quit cpan
  • Install the GD module:
    cpan -i GD
  • Install the GD::Graph module:
    cpan -i GD::Graph
  • Install the CGI module:
    cpan -i CGI
  • Install the LWP module:
    cpan -i LWP
  • Install the Time::Local module:
    cpan -i Time::Local
  • Install the DateTime module:
    cpan -i DateTime
  • Install the XML::LibXML module:
    NoteFor RHEL 5, the newest version of cpan -i XML::LibXML (1.70) is not compatible with the most recent version of libxml in the Red Hat repositories. Thus the an older version of the perl module must be force installed. cpan -if P/PA/PAJAS/XML-LibXML-1.69.tar.gz
  • Install the XML::LibXSLT module:
    Note

    For RHEL 5, the newest version of XML::LibXSLT (1.68) is not compatible with the most recent version of libxslt in the Red Hat repositories. Thus the an older version of the perl module must be force installed.

    cpan -if P/PA/PAJAS/XML-LibXSLT-1.62.tar.gz:
    cpan -i XML::LibXSLT

Darwin

  • About
    The Darwin Streaming Server is an open-source RTP/RTSP server originally developed by Apple as the Quicktime Streaming Server. Darwin is capable of serving MOV and MP4 files that have been hinted for streaming. Variations will use this server to stream audio to the end users. For more information on how Variations' audio streaming works visit the Audio Streaming page. For more information about running Darwin see the Administrator's Guide.
  • Darwin Installation Instructions
    • Download and Install
      • Download Linux Package (for Fedora Core 4 or later, that's us) from:
        http://dss.macosforge.org/
        At that site, scroll down to Related Links at the bottom, and follow Previous releases.
        At the Previous Releases page, under Linux installer (v5.5.5), follow Streaming Server.
        At this point an Apple ID login or account creation, and license agreement is required before the download is started. Download to any tidy location. The download will install into proper standard locations.
      • Once downloaded, unpack it:
        tar -xzf DarwinStreamingSrvr5.5.5-Linux.tar.gz
      • Change location into the unpacked directory and invoke the installation script:
        ./Install
        • You will be prompted for an administrator user name and password.
        • If you get errors from /usr/local/bin/qtpasswd make sure that you have the required i686 libraries then rerun the installation script:
          yum install glibc.i686 libstdc++.i686; ./Install
      • Make the Darwin log path readable for Variations statistics scripts:
        chmod a+rx /var/streaming /var/streaming/logs
    • Installing Darwin as a Service
      To make Darwin start on boot and be accessible as a service in /etc/init.d/ follow these steps:
      • Download the init.d script to /etc/init.d/
      • Set permissions on the script:
        chmod 755 /etc/init.d/dss
      • Set dss to run as a service on boot:
        chkconfig dss on
      • At this point, you can start dss manually:
        /etc/init.d/dss start
        The dss script has five possible actions:
        /etc/init.d/dss option

        Option

        Action

        start

        Starts the server

        stop

        Stops the server

        status

        Provides current running status for streaminaadminserver and DarwinStreamingServer

        restart

        Does a stop and then a start

        condrestart

        If Darwin is running, does a stop and then a start

        reload

        Forces Darwin to reread configuration files without disconnecting users

    • Configuring Darwin
      First, edit /etc/streaming/streamingserver.xml to bind the streaming server to its assigned IP address:
      Code Block
      xml
      xml
      <PREF NAME="bind_ip_addr" >your streaming IP address</PREF>
      
      You will need to restart the Darwin Streaming Servers for this change to take effect.
      /etc/init.d/dss restart
      Point your browser to http://localhost:1220/ to access the Darwin management tool.
      Note

      If you do not have terminal access to this machine and port 1220 is not open, you can try forwarding an X connection through SSH: ssh -Y hostname. This approach requires that X11 is installed on both the server and client of the the SSH connection. Once connected launch the browser of your choice, ie: firefox localhost:1220.

      The only settings that need to be changed for Variations are:
  • the Media Directory
    /home/dmlserv/content/streaming
  • enabling Port 80 streaming
    Port 80 streaming should be turned on as a fall back for the Variations client in case firewalls or NAT devices prevent it from receiving RTSP (TCP and UDP) traffic properly.

...