Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


The RipStation BR6-7604 may be used for shipments that include 15 or more pieces of optical media all of which belong to one of the following categories (follow links for more information on media identification):

  1. Data CDs and/or DVDs and DVD-Video
  2. Compact Disc Digital Audio (CDDA)

If you are working with less than 15 discs of one of the above categories, it will be more time-efficient to simply use the BDPL Ingest Tool, following instructions in the Ingest User Manual and Workflow Guidelines.

The basic workflow for RipStation jobs is as follows:

  • Separate discs in the shipment into one of two groups:
    • Data discs and DVD-Video discs
    • CDDA discs

  • Create RipStation "userdata.txt" file for each grouping of discs; enter item barcodes, one per line.

  • Scan images of each disc (and case or enclosure), following steps outline in the 'Scan the Physical Media' section. (NOTE: this step may be done at the same time as the creation of the UserData.txt file.)

  • Validate userdata.txt file and save to appropriate software folder on the RipStation.
  • Load discs onto the RipStation spindle(s), ensuring they are in the same order as they were entered on the UserData.txt file (i.e., first disc on the first spindle is the first barcode in the file).

  • Start the appropriate RipStation software and configure the settings so that content will be saved to the correct location.

  • Copy files from the RipStation to the appropriate shipment folder on Scandium. 

  • Run

  • Address any discs that failed to transfer during the RipStation batch process.

Separate Optical Media into Appropriate Groupings

When performing batch operations on the RipStation, we will use two separate workflows, each of which require specific types of optical media:

  1. Data discs and DVD-Video discs
  2. Compact Disc Digital Audio (CDDA) discs

See the Section on Identifying and Handling Optical Media for more information on how to distinguish between types of discs.

Create Userdata.txt File

The BDPL RipStation workflows require s 

  • Open a blank plain text document.

  • Scan the item barcode for each disc into the document.  Make sure that the cursor is on a new line before each barcode is scanned.

  • When done, save the file within the shipment folder on Scandium using the filename: userdata.txt

  NOTE: The RipStation will not use the barcodes in the batch process if this naming convention is not strictly followed.

Scan Original Media

While handling the discs to create the userdata.txt file, it may prove convenient to also scan the original media and enclosure on the Epson scanner.  Follow the instructions laid out in the Ingest User Manual section on how to "Scan the Physical Media."

NOTE: To ensure that discs are not mixed up or placed back in the wrong enclosure, be sure to write the last four digits or characters of the barcode along the inside edge of the disc in black permanent marker.  This will be especially helpful if any discs fail and are taken out of their sequential order.

Validate Userdata.txt

Once the 

  • No labels