The Variations Digital Music Library System enables institutions such as college and university libraries and music schools to digitize audio and score materials from their own collections, provide those materials to their students and faculty for teaching, learning, and research use in an interactive online environment, and respect intellectual property rights. The Variations system offers users the ability to play sound recordings, view musical scores, create bookmarks and playlists, and create and save visual annotations for both audio and scores.
Variations is not a digital music collection. Instead, it is a system for institutions to provide their constituencies with access to institutionally owned or licensed content. Variations is most often used to provide controlled access to online music course reserves. But Variations is also useful for providing online access to sound or score collections generally. It is possible to use Variations as the front end for subscription databases such as the DRAM. Variations can also be used to provide online access to non-music audio such as broadcast or oral history collections.
Variations is a digital library system. As such,
The flexible access control system in Variations helps institutions limit access in accordance with local needs and legal interpretations.
The Variations system has been created as a result of a series of grant-funded projects at Indiana University. Funding agencies have included the National Science Foundation, the National Endowment for the Humanities, and the Institute of Museum and Library Services (IMLS). As part of the IMLS grant for the Variations3 project, Indiana University has released the Variations system as open-source and helped other institutions implement the system.
The original Variations project at IU went live in 1996. The technical infrastructure was completely reworked and a new system deployed in 2005, as a result of the Variations2 project. The IU implementation contains approximately 17,000 recordings and several hundred scores. It serves as the primary music reserves system for the Cook Music Library and the Jacobs School of Music. Every semester, students and faculty rely on Variations for thousands of reserve recordings and scores.
As a result of the Variations3 project, Variations is now in use at the the New England Conservatory, Ohio State University, the Philadelphia area Tri-College Consortium (Haverford, Swarthmore, and Bryn Mawr Colleges), and the University of Maryland. At least a dozen additional institutions are currently implementing or evaluating the Variations system.
Variations is an open-source system that relies on other open-source or freely available technologies, including the following.
Variations is available as open source and is therefore freely available. Indiana University continues develop and maintain the Variations system and is investigating mechanisms to provide support. Meanwhile, see the SourceForge site for information on signing up for the support discussion list.
A successful Variations implementation requires leadership from both information technology and library staff. As a technology-based system, Variations requires IT expertise to set up and administer, and typically needs to integrate with other information systems and processes. As a digital library system, Variations also needs to have leadership from the content owning organization such as the library or archive. Content owners need to establish intellectual property protection policies, manage access, develop priorities and workflow for content ingest, establish a preservation strategy, and consult with end users.
Planning a Variations implementation typically extends over a period of weeks or months because organizations may first set up a pilot instance to try it out. Even setting up a pilot instance may require ordering a server, setting up the server within the IT infrastructure, installing the third-party software, installing the Variations software, setting up a digitization station, loading some content, troubleshooting network and firewall issues, and so on. Full implementation may further require iteration with legal counsel on access policy, installation of the client software on classroom or library computers, distribution of client software to other users, creation of workflow documentation, customization of the Variations User Guide, etc.
What server hardware you use for Variations depends completely on how much content you plan to load and how much simultaneous use you expect the system to receive. Variations tends to be more demanding of memory and disk than of processor speed. Another variable is the chosen bitrate(s) at which you will encode. For planning purposes, assuming encoding at both 192kbps and 28kbps, a 74-minute CD will take up approximately 125 MB of disk space. The uncompressed wav file, if you choose to archive it, will require 650 MB of storage. Score pages might average 50KB each, compressed, depending on settings.
For network bandwidth, multiply 192kbps by the peak number of simultaneous streams you expect to figure out whether your network infrastructure is sufficient.
It is difficult to recommend a generic configuration for Variations. At the high end, you might spend $25k to $50, the latter if you want to have a backup system for automatic failover. But for most implementations a $8-10k system should be adequate, and a pilot could be run on a much cheaper or older system.
The Variations digitizer client only runs on Windows PCs, so a recent XP or Vista PC is recommended. Audio compression is CPU-intensive, so doing digitization on a slow system will render the system useless for anything else during compression. If analog audio will be put in Variations, a high-quality sound card or a USB (digital) connection to the analog input device is important. For score scanning, any flatbed scanner should work.
For audio capture and editing, commercial software products such as Sound Forge or WaveLab are typically used, although the free Audacity can also be used.
The fundamental need for system setup and ongoing administration is for a Linux system administrator familiar with downloading, installing and configuring free and open-source software. Specifically, the following components are involved in preparing a server for Variations:
Although we provide step-by-step instructions for setting up Variations, inevitably there will be institutional differences requiring good troubleshooting skills and ability to get help from other experts on campus. Extra help and consulting may be needed during the process by other IT staff such as network engineers (for networking configuration, firewall and bandwidth issues), authentication specialists, authorization system integration (if basing access on course rosters), storage management (for archiving uncompressed derivatives and backing up the server), and client support for Windows and Mac (if distributing client software to end users). Installing client software on end-user-managed systems will take additional support to help users troubleshoot installation problems. If the system will be integrated with a library catalog and/or z39.50 server, some library IT expertise may also need to be consulted.
After the server is prepared for Variations, the Variations system can be downloaded, installed and configured. The system contains a small amount of sample content that can be used to test the system after a digitizer's client is configured, built and installed.
Once Variations is up and working, it requires little involvement for ongoing operation beyond occasional trouble-shooting or upgrades (typically done only once or twice a year).
Although the steps to set up a working system could be done in a day or two, initial setup and configuration often take longer due to coordination and integration issues. For this reason we recommend beginning the process at least two months before you want the system available for pilot testing.
Some of the key decisions to be made that will affect upfront IT time commitment include
Library staffing for the ongoing operation of Variations is primarily for digitization activities. Digitization work can typically be done by student hourly employees as long as the workflow is defined and documented. Digitizers need basic skills in moving files around. Required audio skills depend on whether analog media will be digitized or not. For score scanning, skill level can be low as long as the workflow is carefully documented.
Putting a CD into Variations can take 10-20 minutes form the beginning to the end of the process. Creating compressed derivatives takes the most time, and other work can be done during the compression activity. If the track listing cannot be downloaded from the internet, entering the track titles can add some time, particularly for classical music where it may often be desirable to create a track hierarchy for multi-movement works.
For more information about putting content in Variations, see the Digitization and Cataloging Guide.
During the initial planning and deployment of Variations, library staff will need to work closely with IT to ensure the system is implemented in a way that supports its intended use. Key decisions library staff are involved in include